On The Job
Real Equipment, Real Diagnosis
We don't guess. Every frozen pipe repair call starts with the right tool for what we actually find in the line — not a one-size-fits-all fix.
Central Oregon's high-desert winters push overnight lows well below freezing for weeks at a stretch, and exposed or poorly insulated pipes crack under that pressure every year. We thaw active freezes, repair burst and cracked sections, and insulate the pipe properly so it doesn't fail again the next cold snap.
A frozen pipe and a burst pipe need different responses, and knowing which one you have changes what to do in the first five minutes. Here's how to tell them apart:
| Symptom | Likely Cause | What We Do |
|---|---|---|
| No water from a fixture, pipe cold to the touch | Pipe frozen but not yet cracked | Controlled thawing before pressure builds and splits it |
| Water actively spraying or pooling near a wall or crawlspace | Pipe has already burst from ice expansion | Shut off main water supply, emergency repair of the split section |
| Bulging or frost visible on an exposed pipe | Ice forming inside, pipe under pressure | Careful thaw with heat, monitored for cracks |
| Water stain or damp spot appearing after a freeze | Small crack from a prior freeze, leaking slowly | Camera or visual inspection, section repair |
| Outdoor hose bib frozen solid | Unprotected exterior spigot without a frost-free design | Thaw, repair, and install a frost-free hose bib |
We don't guess. Every frozen pipe repair call starts with the right tool for what we actually find in the line — not a one-size-fits-all fix.
Bend's high-desert climate regularly drops well below 20°F overnight in the winter months, and pipes running through unheated crawlspaces, exterior walls, garages, and attics don't have the surrounding building heat to protect them. Older homes around Downtown and Old Bend, built before modern insulation codes, are especially exposed on exterior-wall plumbing runs. When water freezes inside a pipe, it expands roughly nine percent — enough to split copper, PEX, or PVC from the inside, even if the crack doesn't show until the ice thaws and pressure returns.
We don't take a torch to a frozen pipe. Heat guns, hot-water-soaked towels, and controlled heat cable are applied gradually from the open end of the pipe toward the blockage, checking pressure as we go — this releases the ice without creating a pressure spike that turns a frozen pipe into a burst one. If the pipe has already cracked, thawing comes second to shutting off the water and repairing the split.
Once the water's off, we cut out the cracked section and replace it — copper, PEX, or CPVC, matched to whatever's already running through the house — and pressure-test the repair before we call it done. If the burst happened in a wall or ceiling, we coordinate the plumbing fix first so any drywall or insulation work has a solid, dry line to close back up around.
A pipe that froze once will freeze again in the same spot unless something changes. We insulate exposed runs, add heat tape where it's genuinely needed, and flag hose bibs that should be swapped for a frost-free design — the small upfront cost is a fraction of what a burst pipe and water damage cleanup runs.
These are general market ranges to help you budget — your exact price depends on whether the pipe is frozen or already burst, the pipe material, and how accessible it is. Call (888) 616-9423 for a free, specific estimate before any work begins.
| Service | Typical Range |
|---|---|
| Frozen pipe thawing (accessible) | $175 – $350 |
| Burst pipe section repair | $350 – $750 |
| Frost-free hose bib installation | $225 – $400 |
| Pipe insulation / heat tape install | $150 – $450 |
| Emergency / after-hours call-out | +$75 – $150 |
Ranges shown are typical market pricing for reference only, not a quote. Every job gets a free, upfront estimate before we start.
Whether it's a single-family home near Awbrey Butte or a restaurant in the Old Mill District, you get the same walkthrough: what we found, what it costs, and why — before any work starts.
Bend Plumbing Pros serves homes and businesses across all of Bend — from the waterfront to North Bend. Find your neighborhood below.
No water from a fixture with the pipe cold to the touch usually means it's frozen but intact. Active spraying, pooling water, or a wet spot on a wall or ceiling means it's already cracked — shut off your main water supply and call immediately rather than trying to thaw it yourself.
Carefully, and only if there's no sign of a crack. A hair dryer or space heater aimed at an exposed section, worked gradually from the open end toward the blockage, is reasonably safe. Never use an open flame — it can ignite nearby materials or cause the pipe to crack suddenly under trapped pressure.
Typical frozen or burst pipe repair in Bend runs roughly $175 to $750 depending on whether the pipe is simply frozen or has already split, and how accessible it is. Call (888) 616-9423 for a free, no-obligation estimate.
If a pipe froze once, it's almost always because that section is exposed to cold air with no insulation — an exterior wall, an unheated crawlspace, or a hose bib. Insulating that specific run or adding heat tape is what actually stops it from happening again, not just thawing it each time.
Yes — burst pipes don't wait for business hours, and Bend Plumbing Pros offers same-day emergency response across every Bend neighborhood. Call (888) 616-9423 to check current availability.
Yes, for exposed or vulnerable pipes. A slow drip keeps water moving through the line, which makes it much harder for ice to form solidly enough to crack the pipe. It's a cheap, simple precaution during Bend's coldest nights.
Same-day service, free estimates, every Bend neighborhood.
Call (888) 616-9423